鋁藝大門可以批量化生產，關鍵裝飾部件采用沙鑄和壓鑄，無需進行熱鍍鋅加工等，在保證效果的同時降低了成本，鋁給人的印象是不生銹高等，在我們選購鋁藝門的時候會在很大的程度上提高視覺的上的美感，使得我們的庭院整體更加的具有魅力。
Aluminum art doors can be mass-produced, with key decorative components made of sand casting and die-casting, without the need for hot-dip galvanizing processing, while ensuring effectiveness and reducing costs. Aluminum gives the impression of not rusting and high quality. When we choose aluminum art doors, it will greatly enhance the visual beauty, making our courtyard more attractive as a whole.
鋁藝門具有遮擋視線的作用
Aluminum doors have the function of blocking vision
比如木質推拉門或是玻璃推拉門，它們對光線的遮擋程度都是不相同的，所以其材質的不同決定著其透明度的差異，但由于鋁藝門放置的位置不同，對其功能的要求也是不同的，一般大的空間分隔成小空間除了要考慮推拉門的材質問題之外還有考慮所在空間的采光問題，所以，不同的功能區域?qū)ν该鞫鹊囊笠哺饔胁町?，如果對采光的要求就比較高一些，可選用透明度良好的玻璃推拉門做分隔。也就是說，我們的鋁藝門選購，也是要看陽臺與哪些區域功能的分割。

For example, wood Sliding door or glass Sliding door have different degrees of occlusion of light, so their different materials determine their different transparency. However, due to different locations of aluminum doors, the requirements for their functions are also different. Generally, large spaces are divided into small spaces. In addition to the material of Sliding door, daylighting in the space should also be considered, Different functional areas have different requirements for transparency. If the requirements for lighting are higher, glass Sliding door with good transparency can be used for separation. That is to say, when choosing our aluminum art door, it also depends on the functional division between the balcony and which areas.
鋁藝門的滑輪
Pulley for aluminum door
作為很重要的五金件之一，它的質量和耐用程度決定著推拉門的使用壽命。質量比較好一些的滑輪，中 心采用的是精制的滾珠軸承，其材質又分為鐵、不銹鋼和NRS型，承重耐用的效果也依次增強，外表包有改性的PPS材料，和鋁合金相比要更加堅硬一些，易耐磨抗壓。質量比較低劣的滑輪一般在外部采用普通的工程塑料，比較容易碎裂，中 心幾乎是未采用軸承，只靠涂抹的潤滑油，然后通過機械摩擦來達到滑動效果，這樣很容易沾染灰塵，而且一旦油脂干燥，就會出現阻塞、無法滑動的現象，當然，也有采用普通軸承的滑輪，但是因?yàn)樽龉さ木露炔粔?，鋁藝門在推拉的時候會很沉，需要很用力。
As one of the most important hardware, its quality and durability determine the service life of Sliding door. The pulley with better quality uses refined ball bearings in the center, which are divided into iron, stainless steel, and NRS types. Its load-bearing and durable effects are also enhanced in turn. The surface is coated with modified PPS material, which is harder than aluminum alloy and is easy to wear and resist pressure. Pulleys with relatively poor quality are generally made of ordinary engineering plastic on the outside, which is prone to breakage. The center is almost without bearings and only relies on the lubricating oil applied, which is then mechanically rubbed to achieve sliding effect. This can easily become contaminated with dust, and once the grease dries, it will become blocked and unable to slide. Of course, there are also pulleys with ordinary bearings, but due to insufficient precision in workmanship, Aluminum doors can be very heavy when pushed and pulled, requiring a lot of force.